304 stainless steel

304 stainless steel wire 304 stainless steel is a very common stainless steel, a density of 7.93 g / cm3, the industry also called 18/8 stainless steel. Its high-temperature metal products, processing performance, it is widely used in industrial and medical furniture industry and the food industry.
Common ground marking methods have 06Cr19Ni10, S30408, SUS304 three, including 06Cr19Ni10 generally expressed GB standard production, S30408 generally expressed ASTM standards, SUS 304 Japanese standard labeling standard.
304 is a versatile stainless steel, it is widely used to produce good overall performance requirements (corrosion resistance and formability) of equipment and parts. In order to maintain the inherent corrosion resistance of stainless steel, steel must contain more than 18% chromium, 8% nickel content above. 304 stainless steel is one of the United States in accordance with ASTM standard grades of stainless steel produced.

316 stainless steel

316 and 317 stainless steel (317 stainless steel performance, see below) is a stainless steel containing molybdenum species. 317 stainless steel, molybdenum content slightly clever in 316 stainless steel. Because molybdenum steel, the steel is superior overall performance 310 and 304 stainless steel, high temperature conditions, when the concentration of sulfuric acid is less than 15% and above 85%, the 316 stainless steel has a wide range of uses. 316 stainless steel also has good resistance to chloride corrosion performance, it is usually used in the marine environment. The maximum carbon content of 0.03 316L stainless steel can not be annealed for maximum corrosion resistance and require the use of welding. Carried out in the temperature range of 1850-2050 ° annealed, then rapidly annealed and then rapidly cooled. 316 stainless steel can be hardened thermal treatment. 316 stainless steel has good weldability. All standard welding methods may be used for welding. Welding according to use, respectively 316Cb, 316L stainless steel or 309Cb filler rods or rod welding. For optimum corrosion resistance, Stainless Steel Wire welding section 316 need to be annealed after welding. If you use Stainless Steel Fishing Wire , does not require annealing after welding.

Stainless steel wire

Stainless steel wire, also known as stainless steel wire, stainless steel as raw material made of various types of different sizes and types of silk products, the origin of the United States, the Netherlands, Japan, the cross-section is generally round or flat. Common good corrosion resistance, high cost is 304 and 316 stainless steel wire stainless steel wire.
Stainless steel wires drawing (stainless steel wire rod drawing) under the action of the pulling force of the rod or wire drawing die blanks from the die orifice is pulled to the production of steel or non-ferrous metal wire small section of metal plastic processing. A variety of different cross-sectional shape and size of wire and metal alloys may be employed drawing production. Pull the wire, the precise size, smooth surface, and drawing equipment and tooling used in simple, easy to manufacture.
Process of drawing deformation index
Wire drawing process in increasing the length of the cross section is reduced, before drawing, after the wire cross-sectional area and length, respectively, F. , F and L. , L represents.

Use stainless steel wire rope

Stainless steel wire rope with a plurality of thin stainless steel wire or multi-strand twisted rope flexibility in material handling machinery for lifting, pulling, tensioning and load-bearing purposes. High strength 304 stainless steel wire rope, light weight, smooth, easy to suddenly break the whole root, reliable work.

Stainless steel wire rope use is:

1, non-direct high-speed, heavy load use.

The new stainless steel wire supplier rope not immediately in high-speed, heavy load directly, but to be a period of time at low speed, medium-load conditions, adapt to the use of the new state after the rope, wire rope and then gradually increase the speed and increase the lifting load.

2, is strictly prohibited quit.

Combined with the use of stainless steel wire rope pulley, it must be taken to prevent the rope from the wheel out of the slot. If the rope off the wheel groove after continued use, the rope will have kinks, broken wires, broken stocks, etc., prone to accidents.

3, non extrusion.

When using stainless steel wire rope can not be strongly pressed to avoid rope deformation, resulting in structural damage and broken wires appear early, or even broken rope off shares, significantly reduce the service life of the rope.

4, is strictly prohibited high-speed operation and other objects friction.

At high speeds, the wire rope and the instant when the frictional heat generated by the movement of objects to each other these may lead to emergence of martensite steel surface, which is the main reason for causing early wire breakage.

5. Do scattered wound.

When the stainless steel wire rope wrapped around the drum, should neatly as possible. If scattered wound, the rope at work due to squeezing each other will lead to destruction of the rope structure, resulting in an early broken wire, rope directly affect life.

6, prohibited the use of overload.

Stainless steel wire rope overload will increase its use by extrusion extent, the degree of wear and external wire round match between the grooves between the internal wire, shortening the life of the pulley.

7. Do a dramatic impact.

Several attacks can seriously shorten the life of the rope, the impact load overload the pit directly lead rope break.

8, in use should be done not wet.

Should be possible to use stainless steel wire in a dry environment. Easy to rust under the conditions of use of galvanized steel wire rope.

Technological features 316 stainless steel wire of

316 stainless steel wire in accordance with the requirements of the chemical composition of steel smelting; hot-rolled; annealing and pickling get stainless steel plate blank; coating and drying; stainless steel welding wire cold-drawn; activator using a neutral cleaning and drying; quenching; tempering; Coating and drying; pull made of stainless steel spring wire. This high-performance stainless steel spring wire of energy-saving and environmental protection, with high corrosion resistance, high elasticity and toughness. Preparation methods and advanced technology and simple, stainless steel wire supplier low production costs. 316 stainless steel wire stress state is three to two main stress has been tensile stress to compressive stress, which are compressed with the three main stress to stress compared to being drawn metal wire easier to achieve plastic deformation state. Cold Heading Wire   the second deformation state to the compression state of the three-way principal strain tensile deformation has been the state of play of a plastic metal material adverse more prone to surface defects and exposure. Pass deformation 316 stainless steel wire is subject to restrictions safety factor, the smaller the amount of the drawing pass deformation pass more, so the wires are often used in the production of multi-pass continuous high-speed drawing.

304 stainless steel wire of use and performance

304 stainless steel wire can be divided into chromium and chromium-nickel stainless steel welding electrodes, chromium stainless steel with a certain degree of Stainless Steel Spring Wire   corrosion (oxidizing acids, organic acids, cavitation) heat and corrosion resistance. Is often chosen as power plants, chemical, oil and other equipment and materials. But under normal circumstances chromium stainless steel weldability is poor, should pay attention to the welding process, stainless steel wire supplier heat treatment conditions and the appropriate choice of welding electrodes. 304 stainless steel wire rod has good corrosion resistance and oxidation resistance, widely used in chemical, fertilizer, petroleum, medical machinery. To prevent the heat generated between the eye corrosion, welding current is not too big, not too long arc, rapid cooling between layers to narrow weld appropriate.

The use of stainless steel wire

Stainless steel wire use is divided into: spring steel wire (commonly steel 302,304,316 and 631), cold top with a wire (430,410,304M, 304HC, 302HQ, 316 and 305), wire (ER308, ER309 and ER321) precision shaft with a wire (420J2,4Cr13 and 303), netting wire (430,304,316 and 310), Stainless steel weaving wire with a wire rope (304,316), and 302 stainless steel wire for general purpose wire, such as Nail, cleaning ball bundled wire, drawn wire filament (405,410,430,430L, 304,04HC and 316, etc.). 302 stainless steel wire energy saving and environmental protection, with high corrosion resistance, stainless steel wire rod high elasticity and toughness. Preparation methods and advanced technology and simple, low production costs.

316 stainless steel wire of the physical features and processes

316 stainless steel wire under the action of pulling force of the rod or wire drawing die blank from the die orifice is pulled to the production of metal wire or plastic processing small section of non-ferrous metal wire. Various cross-sectional shapes and sizes of wire metals and alloys can be produced using the drawing. Pull the wire, Stainless steel weaving wire accurate dimensions, smooth surface, and drawing equipment and tooling used in a simple, easy to manufacture. 316 stainless steel wire because the process is simple, widely used, developed earlier. Wire or wire is once again cold steel wire products, the materials used are generally of high quality low-carbon steel or stainless steel. Several programs typically, 316 stainless steel wire to go through the plate element peel, pickling, welding wire  washing, saponification, drying, drawing, annealing, cooling, pickling, washing, galvanizing lines, packaging, etc., in order to produce produce.

Technological features 304 stainless steel wire of

304 stainless steel wire, also known as stainless steel wire, stainless steel for the production of various kinds of raw materials, specifications and models of silk products,, generally circular cross-section or flat. Common good corrosion resistance, high cost is 304 stainless steel wire and 316 stainless steel wire stainless steel wire. Under the action of pulling force of the rod or wire drawing die blank from the die orifice is pulled to the production of metal wire or plastic processing small section of non-ferrous metal wire. Various cross-sectional shapes and sizes of wire metals and alloys can be produced using the drawing. Pull the wire, accurate dimensions, smooth surface, and drawing equipment and tooling used in a simple, easy to manufacture. 304 stainless steel wire stress state is three to two main stress has been tensile stress to compressive stress, which are compressed with the three main stress to stress compared to being drawn metal wire easier to achieve plastic deformation state. Drawing the second deformation Stainless Steel Shaped Wire  to the compression state of the three-way principal strain tensile deformation has been the state of play of a plastic metal material adverse more prone to surface defects and exposure. 304 stainless steel wire pass deformation process is subject to restrictions safety factor, the smaller the amount of the drawing pass deformation pass more, so the wires are often used in the production of multi-pass continuous high-speed drawing.

304 stainless steel wire introduction and application

Stainless steel wire mesh is made of metal wire work, smooth surface, no rust, corrosion-resistant, non-toxic, health, and environmental protection. Uses: Hospital, pasta, grilled meats, living with a basket of flowers, fruit basket series stainless steel mesh-based, stainless steel wire supplier polishing technology for surface treatment, surface bright as a mirror. 304 stainless steel wire heat, acid, corrosion and wear resistance. Because of these characteristics, stainless steel mesh was widely used in mining, chemical, food, petroleum, pharmaceutical and other lines, mainly for gas, liquid filtration and other media separation. 304 stainless steel wire, also known as stainless steel wire, stainless steel as raw material produced all kinds of different sizes and types of silk products, the cross-section is generally round or flat. Common good corrosion resistance, high cost is Stainless steel wire  stainless steel wire. Stainless steel wire drawing, the role of the pulling force of the rod or wire drawing die blank from the die hole pulled out to steel or non-ferrous metal production line of small section of metal plastic forming process. A variety of different cross-sectional shape and size of metal wire metals and alloys can be produced using the drawing.

304 stainless steel wire Uses

316 stainless steel wire, also known as stainless steel wire, stainless steel as raw material produced all kinds of different sizes and types of silk products, the cross-section is generally round or flat. Common good corrosion resistance, high cost is 304 and 316 stainless steel wire stainless steel wire. 316 stainless steel wire drawing, the role of the pulling force of the rod or wire drawing die blank from the die hole pulled out to 304 stainless steel wire or non-ferrous metal production line of small section of metal plastic forming process. A variety of different cross-sectional shape and size of metal wire metals and alloys can be produced Stainless steel wires the drawing. Pull the wire, accurate dimensions, smooth surface, and drawing equipment and tooling used in a simple, easy to manufacture. Wire cross section decreases in the drawing process to increase the length. Metal wire drawing stress state is three to two main stress has been tensile stress to compressive stress, which are compressed with the three main stress state to stress compared to being drawn metal wire easier to achieve plastic deformation state.

304 stainless steel wire 316 stainless steel wire Will not rust

Why? Rusting stainless steel wire also occur when the stainless steel surface rust brown dots, people great surprise: that "Stainless steel is not rusty, rust is not stainless steel, the steel may be a problem," Actually, this. stainless steel wire is a lack of understanding of a one-sided view of the error. Stainless steel rods under certain conditions will rust. 304 stainless steel wire  has the ability to resist the atmospheric oxidation - namely stainless steel, while also having the acid, alkali salt corrosion medium capacity - namely corrosion resistance. But the size of its corrosion resistance of the steel itself is with its chemical composition, plus mutual status, conditions of use and environmental media type and change, 304 stainless steel wire, in a clean dry atmosphere, there is absolutely excellent anti-corrosion ability, but to move it to the waterfront area, contains a lot of salt in the sea mist, Stainless steel wires  soon be rusty, and 316 stainless steel wire, the performance is good. Therefore, not any kind of stainless steel, in any environment resistant to the corrosive, does not rust. Stainless steel is a layer of oxide film extremely light and strong fine stable chromium-rich oxide film (protective film) formed on its surface, to prevent further infiltration of oxygen atoms, to oxidation, to obtain the ability to resist corrosion. Once there is some reason, this film was constantly undermined, air or liquid oxygen atoms or metal will continue to penetrate the iron atoms constantly analyze from it, forming a loose iron oxide, the metal surface will continue to rust.

304 stainless steel wire 316 stainless steel wire Introduction

 304 stainless steel wire, also known as stainless steel wire, 304 stainless steel wire as raw material production, cross-section is generally round or flat. Common good corrosion resistance, high cost is 304 and 316 stainless steel wire stainless steel wire. Under the action of the pulling force of the rod or wire drawing die blank from the die hole pulled out in order to produce metal wire or plastic processing small section of non-ferrous metal wire. A variety of different cross-sectional shape and size of metal wire metals and alloys can be produced using the drawing. Pull the Stainless steel wire , accurate dimensions, smooth surface, and drawing equipment and tooling used in a simple, easy to manufacture. Metal wire drawing stress state is three to two main stress has been tensile Stainless Steel Shaped Wire to compressive stress, which are compressed with the three main stress state to stress compared to being drawn metal wire easier to achieve plastic deformation state. The deformed state is drawn into the compression deformation of the second deformation state to the primary three tensile deformation has been the state of the plastic material, a metal negative play, more prone to surface defects and exposure. Metal 304 stainless steel wire drawing process, the amount of deformation pass safety factor by its restrictions, the smaller the amount of the drawing pass deformation pass more, so often used in the production of wire consecutive multi-channel high-speed drawing.

304 stainless steel wire, 316 stainless steel wire surface bright, beautiful and durable, anti-corrosion, acid and alkali, high temperature, easy to wear, easy to aging, good toughness, strength. Widely used: to weave woven wire mesh, crimped wire mesh, hexagonal wire mesh, conveyor belt, stainless steel wire rope, handicrafts, cutlery rack, and a variety of woven wire meshes, twist flowers, bundled and other purposes.

316 stainless steel wire 302 stainless steel wire drawing process and process characteristics

  Stainless steel as raw material produced all kinds of different sizes and types of silk products, the common good corrosion resistance, high cost of stainless steel wire is 304 and 316 stainless steel wire.
 316 stainless steel wire drawing, the role of the pulling force of the rod or wire drawing die blank from the die hole pulled out to steel or non-ferrous metal production line of small section of Stainless Steel Wire  plastic forming process. A variety of different cross-sectional shape and size of metal wire metals and alloys can be produced using the drawing. Pull the 304 stainless steel wire, accurate dimensions, smooth surface, and drawing equipment and tooling used in a simple, easy to manufacture.
   Metal wire drawing 304 stainless steel wire state is three to two main stress has been tensile stress to compressive stress, which are compressed with the three main stress state to stress compared to being drawn metal wire easier to achieve plastic Stainless steel wires  state. The deformed state is drawn into the compression deformation of the second deformation 304 stainless steel wire to the primary three tensile deformation has been the state of the plastic material, a metal negative play, more prone to surface defects and exposure. Metal wire drawing process, the amount of deformation pass safety factor by its restrictions, the smaller the amount of the drawing pass deformation pass more, so often used in the production of wire consecutive multi-channel high-speed drawing.

304 stainless steel wire 316 stainless steel wire Heat resistance corrosion resistance

   Heat resistance in intermittent use below 1600 degrees and 1700 degrees continuous use in the following, the 316 stainless steel has good resistance to oxidation. In the range of 800-1575 degrees, it is best not continuous role in 316 stainless steel, 316 stainless steel wire supplier  steel, but when used continuously at temperatures outside the range, the stainless steel has good heat resistance.        Corrosion than 304 316 corrosion resistance 304 stainless steel wire with good corrosion performance in the pulp and paper production process. And 316 stainless steel wire is also resistant to aggressive industrial atmosphere and ocean erosion. Under the action of the pulling force of the rod or wire drawing die blank from the die hole pulled out in order to produce metal wire or plastic processing small section of non-ferrous metal wire. A variety of different cross-sectional shape and size of metal wire metals and alloys can be produced using the drawing. Pull the 304 stainless steel wire , accurate dimensions, smooth surface, and drawing equipment and tooling used in a simple, easy to manufacture.          
  Heat treatment in the annealing temperature range of 1850-2050 degrees, then rapidly annealed and then rapidly cooled.316 stainless steel wire can be hardened thermal processing.    Welded 316 stainless steel has good weldability. All standard welding methods may be used for welding.

304 stainless steel Introduction

Stainless steel wire, also known as stainless steel wire, stainless steel as raw material produced all kinds of different sizes and types of silk products, the origin of the United 304 Stainless Steel Binding Wire , the Netherlands, Japan, the cross-section is generally round or flat. Common good corrosion resistance, high cost is 304 and 316 stainless steel wire stainless steel wire. Under the action of the pulling force of the rod or wire drawing die blank from the die hole pulled out in order to Stainless Steel Fishing Wire metal wire or plastic processing small section of non-ferrous metal wire. A variety of different cross-sectional shape and size of metal wire metals and alloys can be produced using the drawing. Pull the wire, accurate dimensions, smooth surface, and drawing equipment and tooling used in a simple, easy to manufacture.

304 stainless steel wire 316 stainless steel wire 302 stainless steel wire Features

302,304 stainless steel welding wire steel Esther point: Surface bright, beautiful and durable, anti-corrosion, acid and alkali, high temperature, easy to wear, easy to aging, good toughness, strength characteristics are widely used: to weave woven wire mesh, crimped wire mesh, hexagonal, conveyor belt, stainless steel wire rope, handicrafts, cutlery rack, and a variety of woven wire meshes, twist flowers, bundled and other purposes.
316 stainless steel; 316 Stainless Steel Wire steel wire can be called stainless steel wire, stainless steel as raw material made ​​of various types of different sizes and types of silk products.