316 stainless steel wire

 AIS1304, 316,321 rope specs.
Stainless Steel Wire for springs has following Characteristics:
Excellent surface finish
High corrosion resistance
Superior coiling efficiency

302 stainless steel wires

1)Grade:201,202,302,304(L),308(L),309(L),310S,316(L),321,347,410,420,430…/200 series,300 Series,400series

2) Standard: AISI, ASTM, DIN, GB, JIS, SUS

3) Diameter: 0.8mm-16.0mm

4) Surface: electrolysis bright, bright, matt. /bright, cloudy, plain, black

5) Certification: ISO9001: 2008

6) Type: spring, bright, hydrogen annealed, welded, etc, etc. /soft and hard

7) Packing:   Woven bag, coil, others are also available according to client' requirement

1mm stainless steel wire

We can make larger sizes within days if needed and can accommodate some special alloys.
Diameters available: .005" through .125" in stainless steel 302, 304, 316 and 316 LVM alloys.
Close tolerances (.0002) available if required.
Centerless ground or drawn finish.
PTFE coating on request.
Our stainless steel wire meets appropriate ASTM specs.

stainless steel wire cloth

T-304 is standard stainless Fine, Medium, Coarse
T-316 is premium stainless Fine, Medium, Coarse
Stainless Welded Mesh
Stainless  Hex Mesh
Micronic Mesh
Use bolting cloth for sifting
Stainless Steel Filter Discs
Very widely used, most popular type of metal mesh
Used from outer space to underwater and everywhere in between

302 stainless steel wires

Type 302 stainless steel wire is a general purpose stainless alloy typically composed of 18% chromium and 8% nickel. It is the most widely used stainless spring wire because of its high corrosion resistance properties and good tensile strength. For spring applications it is generally furnished in the cold drawn condition. Type 302 springs have good strength at moderate temperatures. If properly treated after forming they will set less than most other spring materials at temperatures up to 500ºF. Type 302 material in the spring condition is slightly magnetic due to the transformation of some martinsite in the drawing operation. The greater the amount of cold reduction the higher the degree of magnetism. Gibbs soap coated Type 302 

1mm stainless steel wires

Similar in composition to Type 302, Type 316 stainless steel wire has a slightly higher nickel content and 2-2.50% molybdenum giving this alloy better corrosion resistance. Type 316's tensile strength is 10-15% lower than that of Type 302, and the alloy is slightly less magnetic in the spring temper than Type 302. With its superior cold working properties, it can be used for severe cold forming operations and exhibits short time tensile and creep strength properties at elevated temperatures. Gibbs Type 316 stainless steel wire is coated for coiling and is available in the range 0.015" - 0.625" conforming to ASTM A 313. Nickel coated available on application in size range 0.007" to 0.130"

302 stainless steel wires

Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Read more
about the conditionBrand: KempCo
MPN:
KIWIRE-045-110
Model:
.045 316L Stainless Steel
Country/Region of Manufacture: United States

304 stainless steel binding wires

Ningbo Huayuan 304 stainless steel wire
Materials: 304 302 304L 316 316L stainless steel wire, can be made according to the customers requirement.
Weaving and characteristics: plain weave. Twilled weave, Dutch weave, stainless steel wire mesh is heat-resisting, acid-resisting, wear-resisting, corrosion-resisting.

302 stainless steel wire

Similar in composition to Type 302, Type 316 stainless steel wire has a slightly higher nickel content and 2-2.50% molybdenum giving this alloy better corrosion resistance. Type 316's tensile strength is 10-15% lower than that of Type 302, and the alloy is slightly less magnetic in the spring temper than Type 302. With its superior cold working properties, it can be used for severe cold forming operations and exhibits short time tensile and creep strength properties at elevated temperatures. Gibbs Type 316 stainless steel wire is coated for coiling and is available in the range 0.015" - 0.625" conforming to ASTM A 313. Nickel coated available on application in size range 0.007" to 0.130"

306 stainless steel annealing wire

Similar in composition to Type 302, Type 316 stainless steel wire has a slightly higher nickel content and 2-2.50% molybdenum giving this alloy better corrosion resistance. Type 316's tensile strength is 10-15% lower than that of Type 302, and the alloy is slightly less magnetic in the spring temper than Type 302. With its superior cold working properties, it can be used for severe cold forming operations and exhibits short time tensile and creep strength properties at elevated temperatures. Gibbs Type 316 stainless steel wire is coated for coiling and is available in the range 0.015" - 0.625" conforming to ASTM A 313. Nickel coated available on application in size range 0.007" to 0.130"

Stainless steel binding wire

Type 302 stainless steel wire is a general purpose stainless alloy typically composed of 18% chromium and 8% nickel. The balance of the chemistry is: carbon 15% maximum, manganese 2.00% maximum: and silicon 1.00% maximum. It is the most widely used stainless spring wire because of its high corrosion resistance properties and good tensile strength. For spring applications it is generally furnished in the cold drawn condition. Nickel coated stainless steel wire was developed to have excellent lubrication to minimize friction during the coiling process. The consistent and uniform lubrication helps provide stable spring dimensions and less load variation during coiling. Nickel coated stainless wire eliminates the need for pickling and

Stainless Steel Wire

Type 302 stainless steel wire is a general purpose stainless alloy typically composed of 18% chromium and 8% nickel. It is the most widely used stainless spring wire because of its high corrosion resistance properties and good tensile strength. For spring applications it is generally furnished in the cold drawn condition. Type 302 springs have good strength at moderate temperatures. If properly treated after forming they will set less than most other spring materials at temperatures up to 500ºF. Type 302 material in the spring condition is slightly magnetic due to the transformation of some martinsite in the drawing operation. The greater the amount of cold reduction the higher the degree of magnetism. Gibbs soap coated Type 302

Stainless steel wire supplier

Ningbo Huayuan 304 stainless steel wire4, ASTMA-666, is similar to Type 302, but has a maximum carbon content of 0.08%. This material has an excellent combination of corrosion resistance and formability. Gibbs stocks Type 304 annealed stainless in gauges from 0.0053" to 0.062" and T304 full hard shim stock in gauges from .002"-.025".

Stainless steel wire rod

Ningbo Huayuan 304 stainless steel wire has a spring temper, an unpolished finish, and a precision tolerance, and meets American Society for Testing and Materials International ASTM A313 specifications. The 304 stainless steel grade is a general-purpose material that combines corrosion resistance, weldability, and formability, making it the most commonly used grade of stainless steel. The material may be slightly magnetic and can be cold worked for increased strength and rigidity. The spring temper is stiff and spring like, resisting bends and kinks until a large amount of force is applied.
Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated.
Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Toughness describes the material's ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Magnetism characterizes how much the material is repelled by or attracted to a magnet.

Spring stainless steel wire

Grade : 7x19 304 stainless steel wire rope
Structure : 7x19
Diameter : 1.5- 60mm
Standard : DIN, GB, SUS, AISI, BS, ASTM, JIS etc
Tensile Strength : 1470 , 1570 N/mm2
  Description:
1) Type : 304 stainless steel binding wires Rope
2) Grade : 304
3) Standard : SUS,AISI, ASTM, GB, DIN, JIS
4) Surface : Bright
5) Diameter : 1.5mm-60mm
6) Construction : 7x19
7) Core : IWS / WSC
8) Lay : RHOL, RHLL. LHOL. LHLL
9) Length : 500m/reel, 1000m/reel, 1500m/reel, 2000m/reel etc
10) Packing : Wrapped with plywood reel then put on pallets
11) Payment Term : T/T or L/C etc
12) Loading Port : Shanghai China
13) Delivery Term : EXW, FOB, CFR, CIF
14) MOQ : 1000 meters
15) Delivery Time : Within 10 days after receiving deposit
16) Certification : ISO, SGS etc
17) Technique: Hot/Cold Rolled
18) Nominal Tensile Strength : 1470, 1570 N/mm2

◆ stainless steel bar; stainless steel wire; stainless steel sheet; stainless steel sheet (stainless steel strip); stainless steel tubing; stainless steel wire rope and so on. ◆ Stainless steel rod: round bar (round), square rod (square steel), hexagonal rods (hexagonal), flat (rectangular steel); glossy black surface than expensive large-diameter rods, mostly black leather bar which is 303 rods in a specific material, is easy to drive (cut) type material, mainly used for automatic lathe cutting. Another is: 304 Stainless Steel Binding Wire, 303CU, 316F also are easy-cut materials.
◆ Stainless steel wire: wire, wire, screws, wire, spring wire, all soft lines, bright lines, electrolytic line, car axis; wire and screw the main spring wire line two, by definition: the screw line is mainly used for screws, and springs line used for spring or other requirements with flexible hardware products such as the other bright lines, return lines of hydrogen, electrolysis line, axle hairpin lines have spring wire tensile strength of the hardness of 1500-2000 are the following...: all soft, 1/4 hard, semi-hard, 3/4 hard, full hard, especially hard.
◆ Stainless steel plate: plate, coil; its surface shiny, matte, matte surface, commonly known as stainless steel, with 2B plates, BA plates in addition also according to customer requirements other light color coated sheet is mainly: 1m *... 1m 1m * 2m 1.22m * 2.44m 1.5m * 3m 1.5m * 6m, if the customer demand, we can cut the other dimensions of the customer may be doing some drawing boards, skid plates, plate ◆ Stainless Steel Shaped Wire.: reel, tape, tape, coil;
◆ stainless steel pipe: pipe, seamless pipe, industrial pipe, decorative pipes (pipe joints, welded pipe, welded pipe, light tube, Longitudinal), fluid pipe, hose, pipe polishing; standard stainless steel pipe with more than 200 species, the size of both the small tube is more expensive, especially the capillary. capillary was the worst production from the 304, or burst pipe easily. You can also custom-designed non-standard specifications of the pipe. seamless pipe is mainly used for industrial, surface matte, not shiny. Seamed tube surface is bright side, there is a very thin tube welding line, commonly known as welded pipe, mainly used for decoration materials. Another industrial fluid management, its wall thickness of the decision as anti-stress and .310 310S high-temperature tube .1080 degrees below normal use,Electro Polishing Quality (Epq) Wire the maximum temperature of 11.5 degrees.
◆ Stainless steel wire rope; Rope Specifications: 7 * 1,6 * 12,7 * 7,7 * 19, 17 * 39, etc., than the same material lines, rods, tubes, plates to be expensive to the most expensive 7 *. 7 shares.

Heat treatment: carried out in the temperature range of 1850-2050 ° annealed, then rapidly annealed and then rapidly cooled. 316 stainless steel can be hardened thermal treatment. ? Welding: 316 stainless steel with good weldability. All standard welding methods may be used for welding. Welding according to use, respectively 316Cb, 316L stainless steel or 309Cb filler rods or rod welding. For optimum corrosion resistance, Electro Polishing Quality Wire section 316 need to be annealed after welding. If you use 316L stainless steel, does not require annealing after welding. Typical uses: pulp and paper equipment heat exchangers, dyeing equipment, film processing equipment, piping, exterior building materials used in coastal areas. 304 Stainless Steel Binding Wire: 18Cr-12Ni-2.5Mo because adding Mo, so the corrosion resistance, resistance to atmospheric corrosion and high temperature strength are particularly good, can be used in the harshness of the conditions; hardening excellent (non-magnetic).Binding Binding Wire Sea equipment, chemicals, dyes, paper, oxalic acid, fertilizer and other production equipment; photography, food industry, coastal facilities, ropes, CD rods, bolts and nuts. 316 stainless steel chemical composition: C≤0.08, Si≤1.00, Mn≤2.00, P≤0.035, S≤0.03, Ni: 10.0-14.0, Cr: 16.0-18.5, Mo: 2.0-3.0 316 stainless steel mechanical properties: tensile strength (Mpa) 620MIN, yield strength (Mpa) 310MIN, elongation (%) 30MIN, area reduction (%) Density 40MIN 316 stainless steel: 8.03 g / cm3, austenitic stainless steel generally use this value.

Stainless steel locking wire

Stainless steel wire, Stainless Binding Wire screws wire, stainless steel wire bright wire 316 Name:? 316 stainless steel wire, 316 stainless steel spring wire, 316 stainless steel screw line 316 Stainless Steel 316 and 317 stainless steel (317 stainless steel performance, see below) is a stainless steel containing molybdenum species . 317 stainless steel, molybdenum content slightly clever in 316 stainless steel. Because molybdenum steel, the steel is superior overall performance 310 and 304 stainless steel, high temperature conditions, when the concentration of sulfuric acid is less than 15% and above 85%,316 stainless steel wire has a wide range of uses. 316 stainless steel 304 Stainless Steel Binding Wire with good corrosion performance in the pulp and paper production process. 316 stainless steel and is also resistant to aggressive industrial marine and atmospheric erosion. Heat resistance: the intermittent use of 1600 degrees and 1700 degrees continuous use in the following, the 316 stainless steel has good resistance to oxidation: in the range of 800-1575 degrees, it is best not to effect continuous 316 stainless steel, but in the When the outside temperature range of continuous use 316 stainless steel, the stainless steel has good heat resistance. Resistant 316L stainless steel carbide precipitation performance better than the 316 stainless steel, available in the above temperature range.

also has a good corrosion performance and chloride, it is usually used in the marine environment. The maximum carbon content of 0.03 316L stainless steel can not be annealed for maximum corrosion resistance and require the use of welding. Corrosion resistance: corrosion resistance than

Stainless Steel Wire

302 stainless steel screw line -302HQ Stainless Binding Wire screws Specifications: Diameter above 1.0 Material: 201,202,302,304,316,302HQ, 304HC, 316L
- Characteristics: A high dimensional accuracy, up to ± 0.01mm;304 Stainless Steel Binding Wire B. excellent surface quality, good brightness; C. has strong corrosion resistance, high tensile strength and fatigue strength;stainless steel wire D chemical composition and stability, steel. pure quality, low inclusion content; packaging intact, price concessions; E easy headshot.
316 Features: corrosion resistance, resistance to atmospheric corrosion and high temperature strength are particularly good, can be used in the harshness of the conditions; hardening excellent (non-magnetic); Purpose: photography, food industry, coastal facilities, ropes. 316L features: a low C Series 316, in addition to the 316 have the same characteristics, its excellent corrosion resistance to grain boundary; Purpose: The purpose of 316, against the grain boundary corrosion products with special requirements.

gggggg

Stainless Steel Cold Heading Wire

316 stainless steel wire ropes
1. Products Name : stainless steel wire rope
2. Corlstruction : 7X19 ( 6X19+FC or 6X19+IWRC ) NOTE : 7 strands each consisting of 19single wires.All wires in all strands have the same or similar dia.IWRC is
welding wire rope core.FC is fiber core.
3. Diameter Range :  From 0.2mm to 40mm
4. Products Material : AISI 304 and AISI 316
5. Standard :  EN12385-4 (DIN 3060)
6. Surface treatment : Dry, Bright, Electro Polished and Annealed
7. Lay Direction : R. H. O. L or L. H. O. L
8. Packing Detail : Plastic Coil , Plywood reel , Plastic Coil +Pallet , Plywood reel+Pallet , or according to requirements.
9. Stainless Steel Cold Heading Wire: Not easily broken wire, wear, fatigue resistance, high tensile force, long service life. Can withstand the heavy load, high speed work under the stable running, high tensile strength, large carrying safety coefficient, good safety, have certain can be round, Stainless Steel Fishing Wire material, anti-corrosion performance is good .
10. Products Application : Blast furnace shaft hoisting, lifting, oil Wells, belt conveyor, ropeway traction, the cable car, excavators, large casting crane, crane machine, hot steel, steel machine, ship loading and unloading tension masts of ships, suspension bridge, fishing net and so on.

316 stainless steel wire

Subjected to the cold drawing of the wire to produce significant deformation hardening, its yield limit σs value close to its ultimate strength σb, commonly used in the production of σb value instead σs, Stainless Steel Cold Heading Wire thus achieving the drawing process conditions may also be
Expressed as σT <σ1 <σs; drawing process safety factor K is also available in the ratio of σb and σ1 representation.
Safety coefficient K drawing process is generally 1.40 to 2.0, K <1.40, said drawing too much stress σ1, wire the die hole deformation may continue to occur after pulling fine or pull off phenomenon,Stainless Steel Spring Wire drawing process instability
Set; K> 2.0 Description drawing less stress σ1, pass drawing deformation amount is too small, drawing passes increased. When Roberts pulled diameter of less than 0.05mm ultra-fine wire, and wear die hard, in order to improve the stability of the drawing process
Qualitative, reduce breakage and wear mold times,welding wire improve productivity drawing, can be a safety factor K value greater than 2.0.

Stainless steel weaving wire

Stainless steel wire, also known as Stainless Binding Wire, stainless steel as raw material made of various types of different sizes and types of silk products, the origin of the United States, the Netherlands, Japan, the cross-section is generally round or flat. Common good corrosion resistance, high cost is 304 and 316 stainless steel wire stainless steel wire.
Weaving Wire (stainless steel wire drawing) under the action of the pulling force of the rod or wire drawing die blanks from the die orifice is pulled to the production of steel or non-ferrous metal wire small section of metal plastic processing. A variety of different cross-sectional Electro Polishing Quality (Epq) Wire and size of wire and metal alloys may be employed drawing production. Pull the wire, the precise size, smooth surface, and drawing equipment and tooling used in simple, easy to manufacture.

stainless steel wire supplier

Metal wire drawing stress state for three to two main stress always tensile stress to compressive stress, Stainless steel springs is compressed to three main stress state of stress compared to being drawn wire easier to achieve plastic deformation state. Drawing the deformed state is two to three to compressive deformation along the main tensile deformation of the deformed state, the state of play of a metal material plasticity disadvantageous, and more prone to the exposed surface defects. Metal wire drawing process, the amount of deformation passes subject to restrictions safety factor, the smaller pass deformation is drawing more passes, so often used in the production of wire consecutive multi-channel high-speed drawing.
In the drawing process, the role of being drawn out of the die at the drawing stress σ1 pulling force unit cross-sectional area of ​​the wire on.Annealing Steel Wire In order to make the metal mold plastic deformation in the hole, drawing stress σ1 must be greater than the deformation resistance σT mold hole in the metal deformation zone; and in order to prevent the wire out of the die hole to continue after deformation attenuated or pull off so destabilizing drawing process, drawing stress σ1 must be less than the die hole after being drawn wire yield limit σs, so Annealing Steel Wire the condition for the drawing process is usually expressed as: σT <σ1 <σs. The ratio of K with the who called safety factor drawing process.

Stainless steel raw materials: molybdenum application

Molybdenum application in the chemical industry more striking, especially the rapid development of molybdenum compounds in chemical engineering Stainless Steel Cold Heading Wire. In recent years, despite the downturn in the state of molybdenum, molybdenum compounds but the application is still in the growing, and toward a multi-polar direction. Molybdenum and molybdenum alloy with a high degree of stability in a number of the reaction medium, it is in the chemical industry, oil refining and glass light is widely used in anti-corrosion materials, such as lining chemical equipment, spare parts, valves, steam pipes, heat exchangers , reboilers and the like. Currently, molybdenum and molybdenum alloys have been used for making, such as acids, bases, salts, molten glass, and some components of equipment working in a gaseous medium. Hot concentrated sulfuric acid system as large valves, heat exchangers Stainless Steel Spring Wire   . Allegedly achieve chlorination reaction at 320 ℃ and high pressure conditions the device may also be molybdenum and molybdenum alloys. The main application of molybdenum compounds in the following areas: catalysts and activators, lubricants and lubricant additives, pigments, dyes, paints and inks, water quality and medium ring corrosion agent, composite ion exchanger, batteries, flame retardants, Smoke getter agents, trace additives, molybdenum compound fertilizer, superconducting materials, ceramic materials, polymers, fillers, energy storage materials, gasoline additives, glass materials. It was predicted that the next 10 years, the development of new applications of molybdenum may be mainly reflected in the fine chemical industry, is likely to make a breakthrough molybdenum consumption increases.

Stainless steel raw materials: molybdenum development

The main areas of consumption of molybdenum in the steel industry, the industrialized countries more than 80% of molybdenum as an added element of steel, only about 20% of the molybdenum metal used to produce molybdenum, super alloys and special alloys, chemicals, etc., consumed in oil chemical industry, light industry, electronics and some high-tech areas.Molybdenum and molybdenum alloy rods (bars), wire, sheet, strip, foil and shaped products commonly used in metallurgy, machinery manufacturing,stainless steel wire electronics, lighting and some high-tech fields. Stainless Steel Shaped Wire The illumination filament stent mandrel wire, reflective screen; electronics industry with an anode, a gate and an auxiliary electrode, gasket; vacuum plating, sputtering with the container, a boat, a heater; heat generating element used in a high temperature furnace electrodes, heat shields; surface treatment used for welding, spraying; thermocouple and temperature with protective cover; UO2 refining was burned by boat and so on. The last 10 years, the application of molybdenum was given a further expansion, such as molybdenum powder or molybdenum wire thermal spraying greatly improves the life of the piston rings and gear parts on the car; in glass and fire-resistant fiber material industry, molybdenum can be replaced previous platinum crucibles and electrodes, and achieved great results. The emergence of high-temperature molybdenum, mercury and molybdenum in a vacuum oven halogen range of applications is growing.Stainless steel wires In die-casting industry, molybdenum and alloys can be used as non-ferrous and ferrous metal casting mold material. Molybdenum-based ceramic heat pipe suitable for BOF steelmaking process of continuous measurement of the casing, hot extrusion die; molybdenum alloys are widely used to wear head seamless steel and stainless steel pipe system, significantly improve productivity and product quality, reduce costs. Molybdenum and tungsten alloy formation, its anti (liquid zinc and zinc vapor) particularly excellent corrosion resistance, has generally produced using Mo-30W alloy casing vertical and temperature, greatly reducing maintenance downtime, improve working conditions. MoSi2 oxidation resistance particularly good, use it as a working temperature up to 1700 ℃ heating elements in the atmosphere, but also as a rare earth smelting and some single crystal pulling crucible, instead of precious platinum crucible.

Concerning imports of stainless steel that need attention

Stainless steel material used YHC two points and domestic imports, domestic materials, the use of the European (ISO) system, using ingredients that the more intuitive, is not prone to the problem, and now we focus on the number of issues that need attention imports of stainless steel :
1, the material standards

      Now, we often see the United States imports of stainless steel standard ASME standard SA240, ASTM A240 standards and Japanese JIS standard SUS; grades often used for 304,304L, 316L and so on. 304 The following example to illustrate their representation: JIS standard materials, said the relatively simple, is SUS304 say so; ASME and ASTM, said there are several: SA240-304, SA240TP304, A240-304, A240TP304, in fact, the middle - and plus TP meaning is the same. We have previously mentioned materials 304L, where L is the suffix, indicating a lower carbon content; there can often be seen H, indicates a higher carbon content, mainly used in high temperature applications; also another common There are N, the additional element N, to increase the strength. Sometimes, we can also be seen in the back: 2B, No.1 and other suffixes, these suffix indicates that the surface state of the material; 2B represents hot rolling plus cold rolling, surface better, to mirror the requirements of steel; 2D representation plus cold rolling the hot rolled, the surface of the stainless steel welding wire sheet generally; No.1 represents hot rolling surface.
2, on the alternative materials

      In the eyes of many people, materials, "high-generation low-to-generation thin-thick" is the right and proper thing, no more tubes, in fact, this view is wrong, here we 304,304L, 304H example to explain : General view, 304L than 304 have lower carbon content, better corrosion resistance, so you can replace the 304 material. 304L 304 does meet the requirements, and more than 304, seems to automatically replace 304, but the mechanical properties, the strength is higher than 304 304L, when the press 304 is designed with 304L alternative, will result in insufficient strength; In addition, In China Pressure Vessel GB150-1998 in Article 4.1.6: When the temperature is higher than the use of austenitic Stainless steel weaving wire 525 ℃, the carbon content of the steel should be not less than 0.04%. Therefore, that can replace 304 304L using the wrong point of view, and can not be used with the use of the occasion, but also to capacity in accordance with regulatory requirements, we have no right to "material substitution", only the original design department can only be entitled to a "material substitution "work.

Classification of antibacterial stainless steel

Antibacterial stainless steel produced by antimicrobial resistance is divided into two types: type and their antimicrobial coating type. The former can be modified existing stainless steel products, i.e., on a 304 Stainless Steel Binding Wire plated with a metal material with a germicidal, bactericidal effect, or other inorganic material, but the drawback is easy to wear, easy to aging, temperature changes and with the external environment and change, so that the loss of antibacterial stainless steel; the latter is added in the stainless steel production process some of the metallic elements having antimicrobial activity, through special processing to make antibacterial Electro Polishing Quality (Epq) Wire itself, it does not have the disadvantages of the former, and low cost, easy to processing.99.9% kill rate of E. coli, Staphylococcus aureus killing rate of 99.5%, 99.0% kill rate of Candida albicans, Kuhei bacteria kill rate of 86.6%. Common sense tells us that four kinds of bacteria are the most common ordinary life, to achieve such a killing effect, demonstrated broad-spectrum antibacterial antibacterial stainless steel.

      With the material composition and microstructure of the adjustment and optimization, will further enhance the antibacterial effect. Antibacterial in an aqueous solution / antibacterial test, the antibacterial stainless steel test piece was immersed in the prepared bacteria liquid, by soaking at different times after the bacteria was observed in the number of colonies. The results showed that E. coli and Staphylococcus aureus killing rate of 90% -95%, indicating that the material in an aqueous solution can kill bacteria. That is not only able to kill bacteria in direct contact, but also to kill bacteria without direct contact through the diffusion of the solution.

      Currently materials in the field for the "sterilization" and "antibacterial" there is no clear definition. Generally understood to inhibit bacterial antimicrobial development, growth and reproduction, sterilization is to kill microorganisms. Antibacterial stainless steel can not make it on the attached bacteria multiply, the bacteria are killed or inhibited at low level state, but does not change the intensity of ordinary Stainless Steel Shaped Wire, corrosion resistance, aesthetic features, has a very broad application prospects. Look forward into people's homes.

Antibacterial stainless steel

In the production of kitchen equipment, medical equipment, toiletries and cleaning decoration, people have been looking forward to both the shape of the metal new antibacterial material can appear.

      Both structural and functional properties of new materials - both antibacterial Braiding Wire mechanical properties of structural materials, functional materials have physical and chemical properties, it is like that with the general stainless steel decorative and landscaping as a member, as well as anti-bacterial self-cleaning effect of sterilization.

      Data show now widely used antibacterial agent mainly organic antibacterial agents and inorganic antibacterial agent categories. Organic antibacterial agent has a long history in the medical field has been widely used, mainly in the use of spray or immersion. But they are in safety, durability, broad-spectrum antimicrobial resistance Shaped Wire   , heat resistance insufficient, especially for serious damage to humans and the environment can not be used on many occasions. Inorganic antimicrobial agent is mainly used as an additive, made with antibacterial fabric, plastic products, activated carbon, sanitary ceramics, etc., use of increasingly widespread. But in the heat, wear and corrosion resistance, strength and formability, can not meet the many needs of everyday use. Therefore, in the manufacture of kitchen machinery, medical equipment, bathroom cleaning supplies and carry out renovation, you must use has an antibacterial effect and shapes, appearance of metal products. This stainless steel has antibacterial effect of the new birth, is an ideal product in people's minds.

302 stainless steel screens

Material: sus302 stainless steel Weaving Wire : I type II type braided.
Performance: light weight, good toughness, corrosion resistance, good ventilation, easy to clean.
Uses: used in hotels, public buildings, civil residences against mosquito and so on. This product has acid, anti-corrosion, long time.
Features: plastic surface treatment can do a variety of color.

General characteristics of 304 stainless steel

Most of the long-term requirements of maintaining the original appearance of the building. In determining to choose the type of stainless steel, the main consideration is the aesthetic standards required by the system to be used to clean the corrosion and the location of the atmosphere. However, a growing number of other applications, or just looking for the integrity of the structure is not permeable. For example, industrial building roof and side walls. In these applications, the construction cost of ownership may be more important than the aesthetic, the surface is not very clean and can be. Effect of using Stainless steel wires in dry indoor environment is quite good. However, in rural and urban outdoors in order to maintain their appearance, they need regular cleaning. In heavily polluted industrial areas and coastal areas, the surface will be very dirty, and even rust.
But to get the aesthetic effect of the outdoor environment, it requires the use of nickel-containing stainless steel. So, Binding Binding Wire is widely used in curtain wall, side walls, roofs and other construction purposes, but in severe erosion of industrial or marine atmosphere, the best use of 316 stainless steel. Stainless steel sliding door, it has been fully aware of the use of stainless steel in structural applications superiority. There are several design criteria are included in the 304 and 316 stainless steel. Because "duplex" 2205 has already good resistance to atmospheric corrosion and high tensile strength and elastic limit of integration, so that the European criteria also included the steel. In fact the shape of the product, stainless steel is the whole shape and size of the standard metal manufacturing, and there are many special shapes. The most commonly used products are made with sheet and strip, and plate production with special products, for example, the production of hot-rolled structural steel and structural steel extrusion. And there are round, oval, square, rectangular and hexagonal welded or seamless steel tubes and other forms of products, including profiles, rods, wire and castings.

316 stainless steel

316 and 317 stainless steel (317 stainless steel performance, see below) is a stainless steel containing molybdenum species. Stainless steel weaving wire, molybdenum content slightly clever in 316 stainless steel. Because molybdenum steel, the steel is superior overall performance 310 and 304 stainless steel, high temperature conditions, when the concentration of sulfuric acid is less than 15% and above 85%, the stainless steel welding wire has a wide range of uses. 316 stainless steel also has good resistance to chloride corrosion performance, it is usually used in the marine environment. The maximum carbon content of 0.03 316L stainless steel can not be annealed for maximum corrosion resistance and require the use of welding. Carried out in the temperature range of 1850-2050 ° annealed, then rapidly annealed and then rapidly cooled. 316 stainless steel can be hardened thermal treatment. 316 stainless steel has good weldability. All standard welding methods may be used for welding. Welding according to use, respectively 316Cb, 316L stainless steel or 309Cb filler rods or rod welding. For optimum corrosion resistance, Stainless Steel Wire welding section 316 need to be annealed after welding. If you use Stainless Steel Fishing Wire , does not require annealing after welding.

304 stainless steel applications

Stainless steel weaving wire is one of the most widely used chromium - nickel stainless steel as a versatile, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties; stamping, bending and other thermal processing, and no heat hardening phenomenon (temperature -196 ℃ ~ 800 ℃). Corrosion in the atmosphere, the atmosphere or if it is heavily polluted industrial areas, the need for timely clean to avoid corrosion. Suitable for use in food processing, storage and transportation. Has good processing properties and weldability. Plate heat exchanger, bellows, household goods (1,2 tableware, cabinets, indoor pipes, water heaters, boilers, bath), auto parts (windshield wipers, muffler, mold products), medical equipment, building materials, chemical, food industry agriculture, ship parts, and so on. Stainless Steel Fishing Wire is a nationally recognized food-grade stainless steel.

The basic characteristics of 304 stainless steel

304 Stainless Steel Binding Wire is one of the most widely used chromium - nickel stainless steel as a versatile, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties; stamping, bending and other thermal processing, and no heat hardening (non-magnetic, temperature -196 ℃ ~ 800 ℃). Corrosion in the atmosphere, the atmosphere or if it is heavily polluted industrial areas, the need for timely clean to avoid corrosion. 304 stainless steel wire is widely used to produce good overall performance requirements (corrosion resistance and formability) of equipment and parts. General temperature limit is less than 650 ℃. 304 stainless steel with excellent corrosion resistance and good energy between resistance to intergranular corrosion. For oxidizing acid, in the experiment: the nitrate concentration ≤65% below the boiling temperature of 304 stainless steel with strong corrosion resistance. Most of the alkali solution and organic and inorganic acids also have good corrosion resistance.

The basic characteristics of 304 stainless steel

304 Stainless Steel Binding Wire Binding Wire is one of the most widely used chromium - nickel stainless steel as a versatile, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties; stamping, bending and other thermal processing, and no heat hardening (non-magnetic, temperature -196 ℃ ~ 800 ℃). Corrosion in the atmosphere, the atmosphere or if it is heavily polluted industrial areas, the need for timely clean to avoid corrosion. 304 stainless steel is widely used to produce good overall performance requirements (corrosion resistance and formability) of equipment and parts. General temperature limit is less than 650 ℃. 304 stainless steel with excellent corrosion resistance and good energy between resistance to intergranular corrosion. For oxidizing acid, in the experiment: the nitrate concentration ≤65% below the boiling temperature of 304 stainless steel with strong corrosion resistance. Most of the alkali solution and organic and inorganic acids also have good corrosion resistance.

316 stainless steel wire 302 stainless steel wire drawing process and process characteristics

Stainless steel as raw material produced all kinds of different sizes and types of silk products, the common good corrosion resistance, high cost of stainless steel wire is 304 and 316 stainless steel wire.

 Stainless Steel Wire, the role of the pulling force of the rod or wire drawing die blank from the die hole pulled out to steel or non-ferrous metal production line of small section of Stainless Steel Wire  plastic forming process. A variety of different cross-sectional shape and size of metal wire metals and alloys can be produced using the drawing. Pull the 304 stainless steel wire, accurate dimensions, smooth surface, and drawing equipment and tooling used in a simple, easy to manufacture.

   Metal wire drawing 304 stainless steel wire state is three to two main stress has been tensile stress to compressive stress, which are compressed with the three main stress state to stress compared to being drawn metal wire easier to achieve plastic Stainless steel wires  state. The deformed state is drawn into the compression deformation of the second deformation 304 stainless steel wire to the primary three tensile deformation has been the state of the plastic material, a metal negative play, more prone to surface defects and exposure. Metal wire drawing process, the amount of deformation pass safety factor by its restrictions, the smaller the amount of the drawing pass deformation pass more, so often used in the production of wire consecutive multi-channel high-speed drawing.

304 stainless steel wire 316 stainless steel wire Introduction

304 stainless steel wire, also known as stainless steel wire, 304 stainless steel wire as raw material production, cross-section is generally round or flat. Common good corrosion resistance, high cost is 304 and 316 stainless steel wire stainless steel wire. Under the action of the pulling force of the rod or wire drawing die blank from the die hole pulled out in order to produce metal wire or plastic processing small section of non-ferrous metal wire. A variety of different cross-sectional shape and size of metal wire metals and alloys can be produced using the drawing. Pull the Stainless steel wire , accurate dimensions, smooth surface, and drawing equipment and tooling used in a simple, easy to manufacture. Metal wire drawing stress state is three to two main stress has been tensile Stainless Steel Shaped Wire to compressive stress, which are compressed with the three main stress state to stress compared to being drawn metal wire easier to achieve plastic deformation state. The deformed state is drawn into the compression deformation of the second deformation state to the primary three tensile deformation has been the state of the plastic material, a metal negative play, more prone to surface defects and exposure. Metal 304 stainless steel wire drawing process, the amount of deformation pass safety factor by its restrictions, the smaller the amount of the drawing pass deformation pass more, so often used in the production of wire consecutive multi-channel high-speed drawing.304 stainless steel wire, 316 stainless steel wire surface bright, beautiful and durable, anti-corrosion, acid and alkali, high temperature, easy to wear, easy to aging, good toughness, strength. Widely used: to weave woven wire mesh, crimped wire mesh, hexagonal wire mesh, conveyor belt, stainless steel wire rope, handicrafts, cutlery rack, and a variety of woven wire meshes, twist flowers, bundled and other purposes.

302 stainless steel

302 stainless steel wire is an international labeling methods. 302 stainless steel --S30210 (US AISI, ASTM) characteristics and uses: The cold has a high strength, elongation, but somewhat less than 1Cr17Ni7. Building decorative component. International Stainless Steel labeling methods.
American Iron and Steel Institute with three digits to indicate a variety of standard grade stainless steel malleable.
Among them:
① austenitic stainless steel lined with 200 and 300 series of numbers.
② ferritic and martensitic stainless steel 400 series is represented by a number. For example, some of the more common austenitic stainless steel
Is 302, 304, 316 and 310 marks.
③ ferritic stainless steel is marked 430 and 446, 410, 420, and 440C martensitic stainless steel is a scalar
Hutchison, duplex (austenitic - ferritic).
④ stainless steel, precipitation hardening stainless steel and high alloy iron content of less than 50% usually uses proprietary name or trademark name.
Steel symbol and representation
① chemical element with the symbol of international and national symbols to represent the chemical composition, using the Arabic alphabet to represent the content:
Such as: China, Russia 12CrNi3A.
② with a fixed number of digits to represent the steel type series or digital; such as: USA, Japan, 300 series, 400 series, 200 series.
③ composition of the Latin alphabet and the order number, saying only that purpose.

304 stainless steel food-grade stainless steel

304 stainless steel is suitable for use in food processing, storage and transportation. Has good processing properties and weldability. Plate heat exchanger, bellows, household goods (1,2 tableware, cabinets, indoor pipes, water heaters, boilers, bath), auto parts (windshield wipers, muffler, mold products), medical equipment, building materials, chemical, food industry agriculture, ship parts, and so on. 304 stainless steel wire is a nationally recognized food-grade stainless steel.
surface quality is good or bad, depends mainly on the pickling process after heat treatment, a heat treatment if the first step of the surface oxide formed thick skin or tissue is uneven, it does not improve with pickled surface smoothness and uniformity. So to pay full attention to the heating surface cleaning or heat treatment before heat treatment.
If the thickness of the stainless steel oxide surface unevenness, thick and thin places where the underlying substrate metal surface finish is different, surface and pickling and surface oxide scale dissolution of the base metal attachment site is the extent of acid erosion different, therefore, the steel sheet surface is not uniform. Therefore, when the heat treatment is heated, so as to form an oxide skin must be uniform. To meet this requirement, you must pay attention to the following issues:
If the stainless steel plate attached to the surface of the workpiece during heating oil, the site of attachment of the scale thickness and the scale and the thickness of the other portion of different composition, and will produce carburizing. Subcutaneous base metal oxide is partially cemented will seriously eroded acids. When the combustion of heavy oil burner initially discharged droplets, if attached to the workpiece, a great impact. Operating heavyweight fingerprints attached to the workpiece when will be affected. Therefore, the bath as high officials do not touch the stainless steel parts, do not make a new piece stained with oil. The gloves must Daiqing Jie.
If the surface during cold lubricants attached, must be fully cleaned with warm water and then skim trichlorethylene degreasing agent, caustic soda solution, and then subjected to heat treatment.
If the surface of stainless steel plate with debris, especially when attached to a piece of organic matter or gray, heating certainly will affect the scale.
Differences stainless steel plate of the furnace atmosphere in the furnace atmosphere locally different, oxide scale formed will have a change, which is caused by uneven pickled reasons. Therefore, at the time of heating, atmosphere in the furnace of the various parts must be the same. To do this, you must also consider the atmosphere of the cycle.

304 stainless steel is a versatile stainless steel material

304 stainless steel is a versatile stainless steel material, anti-rust performance than the 200 series stainless steel stronger. Also relatively good high temperature, the general temperature limit is less than 650 ℃. 304 stainless steel with excellent resistance between the resistance and good resistance to intergranular corrosion. For oxidizing acid, in the experiment: the nitrate concentration ≤65% below the boiling temperature of 304 stainless steel wire with strong corrosion resistance. Most of the alkali solution and organic and inorganic acids also have good corrosion resistance.

The basic characteristics of 304 stainless steel

304 Stainless Steel Binding Wire is one of the most widely used chromium - nickel stainless steel as a versatile, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties; stamping, bending and other thermal processing, and no heat hardening (non-magnetic, temperature -196 ℃ ~ 800 ℃). Corrosion in the atmosphere, the atmosphere or if it is heavily polluted industrial areas, the need for timely clean to avoid corrosion. 304 stainless steel is widely used to produce good overall performance requirements (corrosion resistance and formability) of equipment and parts. General temperature limit is less than 650 ℃. 304 stainless steel with excellent corrosion resistance and good energy between resistance to intergranular corrosion. For oxidizing acid, in the experiment: the nitrate concentration ≤65% below the boiling temperature of 304 stainless steel with strong corrosion resistance. Most of the alkali solution and organic and inorganic acids also have good corrosion resistance.

316 stainless steel wire 302 stainless steel wire drawing process and process characteristics

Stainless steel as raw material produced all kinds of different sizes and types of silk products, the common good corrosion resistance, high cost of stainless steel wire is 304 and 316 stainless steel wire.
 316 stainless steel wire drawing, the role of the pulling force of the rod or wire drawing die blank from the die hole pulled out to steel or non-ferrous metal production line of small section of Stainless Steel Wire  plastic forming process. A variety of different cross-sectional shape and size of metal wire metals and alloys can be produced using the drawing. Pull the 304 stainless steel wire, accurate dimensions, smooth surface, and drawing equipment and tooling used in a simple, easy to manufacture.
   Metal wire drawing 304 stainless steel wire state is three to two main stress has been tensile stress to compressive stress, which are compressed with the three main stress state to stress compared to being drawn metal wire easier to achieve plastic Stainless steel wires  state. The deformed state is drawn into the compression deformation of the second deformation 304 stainless steel wire to the primary three tensile deformation has been the state of the plastic material, a metal negative play, more prone to surface defects and exposure. Metal wire drawing process, the amount of deformation pass safety factor by its restrictions, the smaller the amount of the drawing pass deformation pass more, so often used in the production of wire consecutive multi-channel high-speed drawing.

The reason 304 stainless steel rust phenomenon occurs

304 stainless steel wire 304 reasons appear rusting stainless steel rusting occurs, there may be several reasons:
1. Chloride
Widespread presence of chloride ions, such as sodium chloride / sweat / sea / sea / soil, and so on. Stainless steel in the presence of chloride ions in the environment, corrosion and soon, even more than the ordinary low carbon steel. Therefore, the use of stainless steel environment requirements, and require frequent cleaning to remove dust, clean and dry. (So that you can give him set a "misuse.") The United States is an example: a company with an oak containers with a solution of chlorine ions, the container has been used hundreds of years, plans to replace the nineties due to lack of modern oak material, the use of stainless steel replacement 16 days after container leak due to corrosion.
2. Solution treatment
No alloying elements dissolved in the matrix, resulting in tissue matrix alloy content is low, poor corrosion resistance.
3. intergranular corrosion
This material does not contain titanium and niobium have a tendency to intergranular corrosion. Adding titanium and niobium, which together with the stabilization process can reduce intergranular corrosion. In the air or chemical corrosion medium can resist a high-alloy steel, stainless steel is a beautiful surface and good corrosion resistance, without going through the plated surface treatment, play inherent in the surface properties of stainless steel, for use in multi-an aspect of the steel, commonly referred to as stainless steel. Representative of the performance of 13 chrome steel, chrome-nickel steel alloy 18-8. From the metallographic point of view, because the stainless steel contains chromium chromium film formed on the surface leaving a thin, the membrane separating oxygen from invading the inner steel corrosion effect. In order to maintain the inherent corrosion resistance of stainless steel, the steel must contain more than 12% chromium. The need for welding applications. Lower carbon content makes it close to the weld heat affected zone to minimize carbide precipitation, and carbide precipitation may lead to intergranular corrosion of stainless steel in some environments (welding erosion).
4. appearances
Refers to the phenomenon of surface marks 304 stainless steel deep processing or processed products after grinding, wire-bound pit marks or dot defects in the product surface.
The reason: the surface, the mold surface of a foreign body, blank pad surface scars.
Solution: Before processing to remove the foreign body, the scars can also be removed by thoroughly grinding and orange peel.
Orange peel refers to the molded article 304 in the polishing or other cases, the surface of the same shape as the orange peel phenomenon.
Cause: The grinding is not sufficient, the more severe the greater processing orange peel, raw coarse grains, heat softened.
Solution: deep processing products are fully ground, select the appropriate heat treatment conditions, controlling the grain size of raw materials.