Stainless Steel Cold Heading Wire

316 stainless steel wire ropes
1. Products Name : stainless steel wire rope
2. Corlstruction : 7X19 ( 6X19+FC or 6X19+IWRC ) NOTE : 7 strands each consisting of 19single wires.All wires in all strands have the same or similar dia.IWRC is
welding wire rope core.FC is fiber core.
3. Diameter Range :  From 0.2mm to 40mm
4. Products Material : AISI 304 and AISI 316
5. Standard :  EN12385-4 (DIN 3060)
6. Surface treatment : Dry, Bright, Electro Polished and Annealed
7. Lay Direction : R. H. O. L or L. H. O. L
8. Packing Detail : Plastic Coil , Plywood reel , Plastic Coil +Pallet , Plywood reel+Pallet , or according to requirements.
9. Stainless Steel Cold Heading Wire: Not easily broken wire, wear, fatigue resistance, high tensile force, long service life. Can withstand the heavy load, high speed work under the stable running, high tensile strength, large carrying safety coefficient, good safety, have certain can be round, Stainless Steel Fishing Wire material, anti-corrosion performance is good .
10. Products Application : Blast furnace shaft hoisting, lifting, oil Wells, belt conveyor, ropeway traction, the cable car, excavators, large casting crane, crane machine, hot steel, steel machine, ship loading and unloading tension masts of ships, suspension bridge, fishing net and so on.

316 stainless steel wire

Subjected to the cold drawing of the wire to produce significant deformation hardening, its yield limit σs value close to its ultimate strength σb, commonly used in the production of σb value instead σs, Stainless Steel Cold Heading Wire thus achieving the drawing process conditions may also be
Expressed as σT <σ1 <σs; drawing process safety factor K is also available in the ratio of σb and σ1 representation.
Safety coefficient K drawing process is generally 1.40 to 2.0, K <1.40, said drawing too much stress σ1, wire the die hole deformation may continue to occur after pulling fine or pull off phenomenon,Stainless Steel Spring Wire drawing process instability
Set; K> 2.0 Description drawing less stress σ1, pass drawing deformation amount is too small, drawing passes increased. When Roberts pulled diameter of less than 0.05mm ultra-fine wire, and wear die hard, in order to improve the stability of the drawing process
Qualitative, reduce breakage and wear mold times,welding wire improve productivity drawing, can be a safety factor K value greater than 2.0.